Radio Shack 49-2514 - Manual (Page 7)

7
4. Select the desired recording speed and other settings
on your VCR.
5. Begin recording.
8%4"2 .#;$#%- " 61 " 6*' "/ 10+614
To view a recorded tape through the monitor, follow these
steps.
1. Turn on the monitor and the VCR.
2. Press VCR on the monitor's front panel. The VCR
indicator lights.
3. Begin playback on the VCR.
6417$.'5*116+0)
If your monitor is not working as it should, these
suggestions might help you eliminate the problem. If the
monitor still does not operate properly, take it to your local
store for assistance.
No picture appears.
• Be sure the monitor's power is on.
• Check the connections between the camera and the
monitor. Be sure audio and video cable connections are
secure.
• Adjust CONT .
Image is not clear.
• Adjust CONT .
• Adjust BRIT .
• Adjust V-HOLD or H-HOLD .
• Be sure the selected camera is not pointed directly at a
light source.
Cannot record to a VCR.
• Check the cable connections. Be sure audio and video
cables are not reversed.
• Be sure the VCR is set to audio/video input and is set to
record.
• Check the connections between the camera and the
monitor.
T
roubleshoot
ing