Radio Shack PRO-94 User Manual

Page 44

Trunking Operation

Identifying a Trunked Frequency

While ID scanning (looking for IDs within a trunked sys-
tem) or performing an ID search, press

to see the

current trunked frequency. (The frequency flashes
twice.) Then hold down

until a confirmation tone

sounds and the ID and the frequency alternately appear.
To return to normal operation, press

Selecting the EDACS Talk Group ID Format

The EDACS system uses two group ID formats: Decimal
and Agency-Fleet-Subfleet (AFS). If you use a list of IDs
shown in one format (for example AFS) and the ID you
want to receive is in the other format (for example, deci-
mal), press

SVC (E)

to switch to the decimal format. The

ID appears in decimal format.

flashes on the display

when the decimal format is selected.

EDACS Talk Group ID Range Search

To search EDACS IDs faster, set a range for the Agency
or Fleet listings. Enter the Agency (or the Agency and
the Fleet) listing numbers using the number keys, then
press

SRC (LIMIT)

. Note the following examples.

Example 1
Agency = 01
Press

SRC (LIMIT)

01---

appears during search.

Example 2
Agency = 01 Fleet = 01
Press

SRC (LIMIT)

01-01-

appears during search.

To stop an ID range search, press

SRC (LIMIT)

20-524A.fm Page 44 Tuesday, June 27, 2000 3:41 PM