Reliable C88 - Manual (Page 2)

USER INSTRUCTIONS C88
Thank you for purchasing the Reliable™ C88 vacuum pressing table. Please
follow the instructions carefully. With proper care and maintenance, your
ironing table will provide years of dependable service.
The C88 is equipped with a powerful and fast vacuum motor. The strong
vacuum will give you a clean-crisp finish to your garments, guaranteeing
professional results. The fast start up time means you won’t be waiting for
the motor to rev up to speed.
1. Unfolding: Hold the ironing board in a vertical position with the tip
downwards; press the handle (5) placed underneath the board and lift up
the working surface by pulling with the foot outwards until the desired
height is reached.
2. Unfold the boiler support (3) and place the steam generator on the shelf.
3. Insert the electrical plug into an electrical outlet.
4. Place the pedal (1) near the working area.
5. Push the on/off switch (2) on the “I” position.
6. Wait for a few minutes until the working surface is warmed up.
7. Start ironing.
8. The vacuum function is controlled by the pedal (1)
9. You can use the vacuum function at the same time as you are ironing, or you
can use it after the ironing (for very light fabrics this may be the preferred
way).
10. At the end of the ironing we suggest you leave the on/off switch (2) on for
a few minutes to ensure the inside of the table is dry and free of
condensation.
11. Folding: turn the on/off switch (2) off, remove the plug from the outlet.
Take the boiler and the iron off of the boiler support (3), fold the boiler
support (3), and make sure there is no garment on the working surface
and/or on the catch tray (4).
12. As soon as the working surface is cool, position the ironing board
vertically with the tip downwards, press the handle (5) placed under the
working surface and at the same time pull the legs (6) inward.