RCA L37WD14 - Manual (Page 37)

Chapter 4 37
Using the TV's Menu System
Go back
Sound preset Personal...
Frequency range ...
Equalizer
To view the frequency range of another Sound preset option, press
the right or left arrow until no band is selected and Frequency
range is highlighted. Then press the up arrow to highlight Sound
preset.
Sound type Controls the way the sound comes through your
speakers. The options available vary according to the input selected.
Mono (available for regular TV viewing only) Plays the sound in
mono only. Use this setting when receiving broadcasts with weak
stereo signals.
Stereo Splits the incoming stereo audio signal into left and right
channels. Most TV programs and recorded materials have stereo
audio. The word Stereo appears in the channel banner when you
tune to a program that is broadcast in stereo.
Note: Sound type and its menu choices are only available with
components programmed to the SAT•AUX button.
Sound mode Provides special processing through your speakers
(depending on the setting you chose as your Sound type). The
available audio modes are:
Normal Does not give any special processing, simply provides
the mono or stereo sound provided by the signal you're watching.
Wide (available only for mono signals) “Widens” sound from
mono broadcasts and mono devices connected to your TV for a
fuller, more spacious sound.
Stereo Wide Available only for stereo signals. Gives a surround
effect with more bass.
BBE Maximizes simulated sound effects while maintaining clarity
and defi nition.
Dynamic Bass Improves bass output. Displays a choice list of
available settings you can adjust: Off, Medium and High.
Balance Adjusts how much audio is sent to the left and right
speakers.
Auto Volume Level Reduces the annoying blasts in volume during
commercial breaks, and also amplifi es softer sounds in program
material. Eliminates the need to constantly adjust the volume.
Internal speakers Turn on or off the internal speakers. If you have
a device connected to the Audio Output jacks on the back of the TV
and you want to control the sound by the device instead, uncheck the
box.
Headphone settings Displays a choice list of available settings you
can adjust: Volume, Bass and Treble. The Headphone sound option
allows you to choose Stereo, Mono or Auto. These descriptions are
same as for Sound Type (see above).
Go back
Equalizer ...
Sound type Stereo...
Sound mode Normal...
Dynamic Bass Medium
Balance
Auto Volume Level
Internal speakers
Headphone settings ...
Advanced settings ...
Sound
1668591B.indb 37 1668591B.indb 37 6/5/06 3:28:24 PM 6/5/06 3:28:24 PM