Remington BHT-500 - Manual (Page 2)

Warranty
Limited Two-Year Warranty
Spectrum Brands, Inc. warrants this product against any defects that are due
to faulty material or workmanship for a two-year period from the original date
of consumer purchase. This warranty does not include damage to the product
resulting from accident or misuse.
If the product should become defective within the warranty period, we will repair
it or elect to replace it free of charge. Return your product and sales receipt
with your name, address and day time phone number to: Spectrum Brands, Inc.,
Attention: Consumer Services, 601 Rayovac Drive, Madison, WI 53711. For more
information call 800-736-4648.
KEEP ORIGINAL SALES RECEIPT AS PROOF OF PURCHASE FOR WARRANTY PURPOSES.
This warranty does not cover products damaged by the following:
■
Accident, misuse, abuse or alteration of the product
■ Servicing by unauthorized persons
■ Use with unauthorized accessories
■ Connecting it to incorrect current and voltage
■ Wrapping cord around appliance causing premature wear & breakage
■ Any other conditions beyond our control
No responsibility, obligations, or liability is assumed for the installation or
maintenance of this product.
SPECTRUM BRANDS, INC. SHALL NOT BE RESPONSIBLE FOR ANY INCIDENTAL,
SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS
PRODUCT. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO IMPLIED
WARRANTIES OF FITNESS AND MERCHANTABILITY, ARE LIMITED IN DURATION
TO TWO YEARS FROM DATE OF ORIGINAL PURCHASE.
This warranty gives you specific legal rights and you may also have other rights
which vary from state to state or province to province. Some states do not allow
the exclusion or limitation of incidental, special or consequential damages.
Spectrum Brands, Inc. Money-back Offer
If within 30 days after you have purchased your Remington ® branded product,
you are not satisfied and would like a refund, return it with the sales slip indicat-
ing purchase price and date of purchase to the retailer from whom it was pur-
chased. Spectrum Brands, Inc. will reimburse all retailers who accept the product
within 30 days from the date of purchase. If you have any questions concerning
the money-back guarantee, please call 800-736-4648.
Troubleshooting
Q: WHAT IF THE CUTTERS DON’T MOVE WHEN TURNED ON?
A: The cutting unit may be dirty or clogged. Clean and lubricate the groomer as
described previously.
Q: WHAT IF THE GROOMER DOESN’T WORK AT ALL WHEN TURNED ON?
A: The groomer might simply need charging. Follow instructions for charging as
described previously. Should charging prove unsuccessful, contact customer
service at 1-800-736-4648 for assistance.
Q: WHAT IF THE GROOMER FAILS TO HOLD A CHARGE?
A: Fully discharge the groomer by running until completely stopping. Next, follow
recharging instructions described previously. If time between recharging cycles
fails to increase, the battery might require replacement. Contact customer
service at 1-800-736-4648 for assistance.
120 VAC 60 Hz
Questions or comments: Call 800-736-4648 in U.S. or 800-268-0425 in
Canada or visit www.remington-products.com
REMINGTON is a Registered Trademark of Spectrum Brands, Inc., or one of
its subsidiaries.
©2008 SBI 03/08 Job# CS35969
Dist By: Spectrum Brands, Inc., Madison, WI 53711
MADE IN CHINA
T22-26464
Always clean Grooming System attachments regularly to ensure maximum
performance and a proper operating life. The Body Trimmer is washable so it
can be used in the shower or rinsed under water during cleaning. Therefore, to
maintain performance of cutters, oil before each use and after rinsing.
Cleaning Cautions
■
Only the adjustable trimmer comb and cutter assembly may be removed from
the trimmer for cleaning.
■ Cleaning should be done with a soft brush, such as the brush supplied with the
unit.
■ Only use the light-grade oil supplied or a suitable alternative like sewing
machine oil. These oils will not evaporate or slow down the blades.
■ Do not use harsh or corrosive cleaners on the units or their cutters.
■ Do not apply pressure or hard objects to cutters.
■ Do not disassemble cutter assembly.
■ There are no user serviceable parts.
■ The handheld unit should be detached from the power supply cord before
cleaning.
CLEANING TRIMMER ATTACHMENT WITH GROOMING BRUSH / WATER
■
Thoroughly brush and blow out hair clippings from cutter system, attachment,
and handle.
■ Rinse the attachment under warm running water. Do NOT use extremely hot
water as this might cause damage to components.
CLEANING FOIL SHAVER
■
Do NOT oil foil shaver attachment as this is permanently lubricated.
■ Press release buttons inward at sides of screen head.
Cleaning, Care & Maintenance
The Body Trimmer can be used in the shower or rinsed under water during
cleaning. Therefore, to maintain performance of cutters, oil before each use and
after rinsing.
TRIMMER GUARD ATTACHMENT
Remove Trimmer Guard Attachment to define hairline edges, holding trimmer
at a right angle to skin and gently pressing. Edge and shape all body areas, as
desired. To remove:
1. Be sure Groomer is in OFF position.
2. While holding Groomer in one hand, while holding Zoom Wheel with other hand,
gently pull Trimmer Guard Attachment away from Groomer.
3. Replace Guard by repeating steps #1 and #2. (NOTE: Guard can only be placed
on Groomer one way. If not fitting properly, simply remove and reverse).
ADJUSTABLE TRIMMER HEAD
The Grooming System is equipped with a 5-Position adjustable Trimmer Head to
allow flexible Body Grooming. To use:
1. Be sure Groomer is in OFF position.
2. Use thumb wheel to set trimmer comb to desired length setting.
3. Slide On/Off Switch upward to power the Body Groomer.
4. Place flat top of trimmer comb gently against the skin.
5. When finished, turn power off by sliding On/Off Switch downward. Clean the
Grommer and return it to the storage pouch.
FOIL SHAVER ATTACHMENT
First, remove Trimmer Comb Attachment by holding the Groomer in one hand
with thumb firmly pressed against Thumb Wheel to prevent from turning. With
opposite hand, gently pull Trimmer Comb Attachment off Trimmer. Remove cut-
ting assembly by firmly pushing upward on blade with thumb. Use other hand to
“catch” cutting assembly.
To add Foil Shaver Attachment, carefully align Shaver assembly with the Groomer
Body. Slide Foil Shaver down toward Groomer until firmly securing into place.
How To Use To Operate:
1. Remove Foil Shaver protective cover.
2. Slide On/Off Switch upward to Power the Foil Shaver.
3. Hold shaving head to skin.
4. Stretch skin with free hand so hairs stand upright. Only apply light pressure on
shaving head while shaving.
5. Shave in a direction opposite of hair growth.
The groomer is a wet groomer, the hand-held part of which
may be used in a bath or shower.
■ Remove head and shake out clippings. Blow off cutter assembly.
■ Replace head, snapping in place to secure.
OILING BLADES & CAUTIONS
■
Rinsing attachments under water (above) requires lubricating the cutting blades.
Using only light-grade oils (e.g. sewing machine oil), simply spread 1-2 drops
lightly over cutters with fingertip. Wipe away all excess.
■ Use only light-grade oils as these will not evaporate nor slow down speed of
cutting blades.
■ Do not use hair oil, grease, or any oil mixed with kerosene nor solvent as these
too will evaporate.
NOTE: Always recycle or properly dispose of batteries according to Local and
State requirements.
1. Unplug groomer from outlet to avoid risk of electrical shock.
2. Remove rear groomer cover by first prying the rubber panel
from the product with a flat head screwdriver.
3. Next, pry the back panel from the product with a flat head
screwdriver. This will expose the batteries.
4. With wire cutters, clip the wires leading to the batteries.
Battery Removal
5. Remove the batteries from the product. Contact your local authorities for proper
disposal.
CAUTION: THESE NICKEL-CADMIUM BATTERIES MUST BE RECYCLED OR DISPOSED
OF IN ACCORDANCE WITH STATE AND LOCAL REGULATIONS.
Do not burn or mutilate, as they may burst or release toxic materials. Do not short-
circuit, as this may cause burns.
The EPA-certified RBRC ® Battery Recycling Seal on the nickel-cadmium (Ni-Cd)
battery indicates Spectrum Brands, Inc. is voluntarily participating in an indus-
try program to collect and recycle these batteries at the end of their useful life
when taken out of services in the United States or Canada. The RBRC ® program
provides a convenient alternative to placing used Ni-Cd batteries into the trash
or the municipal waste stream, which may be illegal in your area. Please call
1-800-8-BATTERY SM for information on Ni-Cd battery recycling and disposal bans/
restriction in your area. Spectrum Brands, Inc.'s involvement in this program is
part of our commitment to preserving our environment and conserving our natural
resources.
35969_BHT-500_IBA.indd 2 3/26/08 2:20:40 PM