Set up – RedMax BC250 User Manual

Page 13

■ INSTALLING HANDLE
• Mount the handle to the shaft tube and clamp it

at a location that is comfortable to you. (SE1)

(1) About 19 inches (48cm)

■ INSTALLING DEBRIS GUARD
• Put the debris guard on the tube, attach it with

the 2 screws and clamp provided. (SE2)

■ INSTALLING CUTTING HEAD (SE3)
1. While locking the gear shaft, by inserting the

supplied tool into the upper holder on the gear
box, loosen and remove the hexagon nut(left-
handed)

2. Fit the line head assembly to the gear shaft over

the holders. Hand-tighten it securely.
Blades should not be used on this model
trimmer.

6. Set up

(1)

SE1

SE2

13 

SE3