Ryobi RB101 - Manual (Page 7)

Page 7
UNPACKING
INSTRUCTIONS
When unpacking the buffer/polisher:
Carefully remove the tool and accessories from the
box.
Make sure that all items listed in the packing list are
included.
Inspect the tool carefully to make sure no breakage
or damage occurred during shipping.
Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
tool.
If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
PACKING LIST
10 in.(254 mm) Buffer/Polisher
1 Application bonnet
1 Polishing bonnet
Operator’s Manual
Warranty Registration Card
APPLICATIONS
You may use the buffer/polisher on the surfaces listed below:
Car
Boat
RV
Personal Aircraft
Motorcycle
Hardwood floors
Large furniture
WARNING:
If any parts are missing do not operate your tool until
the missing parts are replaced. Failure to do so could
result in possible serious personal injury.
WARNING:
The buffer/polisher should never be connected to a
power supply when you are assembling parts, making
adjustments, cleaning, performing maintenance, or
when the tool is not in use. Disconnecting the tool will
prevent accidental starting that could cause serious
injury.