Radio Shack PRO-79 - Manual (Page 18)

18
dEFAULt Appears when you remove all the lock-outs from
the service bank frequencies.
D-Err Appears when the scanner receives a data error
during wired programming.
DLY Appears when you program a 2-second delay.
End Appears when the scanner has finished wired
programming.
Error Appears when you make an entry error.
FD/PD Indicates that the scanner is searching the fire/
police service bank.
FLo ALL-CL Appears when you remove all the locked-out fre-
quencies during a service bank or direct search.
FLo-FULL Appears when you try to lock out a frequency
during a search while 50 frequencies are already
locked out.
F L-out Appears when you start a direct search from a
locked-out frequency.
HAM Indicates that the scanner is searching the ama-
teur radio service bank.
L/O (lockout) Appears when you manually select a channel
that was previously locked out during scanning or
when you review a locked-out frequency.
L-r Appears when you review the locked-out fre-
quencies.
M Flashes with a number (1–20) to show which
monitor memory you are listening to.
MAN Appears when you manually select a channel.
MRN Indicates that the scanner is searching the ma-
rine service bank.
oFF tonE Appears when you turn the key tone off.
20-314.fm Page 18 Monday, December 13, 1999 12:55 PM