Troubleshooting guide, Specifications – Riccar 1500P User Manual
Page 12
12
■ Please check each item below if you have trouble with your vacuum.
Before checking, ensure that the vacuum is unplugged from the power supply.
TROUBLESHOOTING GUIDE
Problem
•
Suction power is weak.
•
The vacuum does not work.
•
Power cord does not rewind.
•
Power cord won't pull out of
the vacuum.
Check Point
•
Vacuum bag
•
Wand or hose
•
Is the hose adapter inserted
into the suction opening of the
vacuum completely?
•
When the vacuum bag is full
or any of the accessories are
blocked, the over-heating
protection for the motor is
activated.
•
Power cord
•
Power cord
Note
•
If vacuum bag is full, replace
it.
•
If clogged or blocked, remove
the object.
•
Insert it completely.
•
Switch off and unplug the
vacuum and check the
vacuum bag and accessories
and remove any blockages.
The vacuum can be switched
on again after approximately
20 minutes.
•
Pull the power cord out a little
and press the cord rewind
button again.
•
Do not pull it by force. Rewind
it a little by pressing the cord
rewind button and try pulling it
out again.
•
Specifications can be changed for improvement without notice.
For assistance please visit www.Riccar.com or call 1-888-6-Riccar.
Model
Rating
Amps
Weight
Dimension (L X W X H)
Cord Length
1500P
120V/60Hz
9.5A / 12A (with Power Nozzle)
15.5 Pounds
19" x 12.5" x 9.3"
18 feet
SPECIFICATIONS
R1500P(EN-TACONY)-9.3
2004.9.3
9:55
AM
13