Ricoh 21-1825 - Manual (Page 12)

12
Important: The FCC does not al-
low you to send a continuous tone
for more than 10 seconds at a time
on FRS frequencies. Do not hold
down
CALL for more than 10 sec-
onds.
Set QUIET to the desired code to
provide greater communication
flexibility. See “Quiet Codes” on
Page 14.
Press
8
to scan up through the
channels, or
9
to scan down
through the channels.
Hold down PUSH TO TALK and
speak into MIC to transmit. When
you finish your transmission, re-
lease
PUSH TO TALK . BUSY ap-
pears when a call is being received.
Hold down MON (monitor) ( SHIFT )
to hear everything on a channel,
even weak transmissions. Release
MON to turn auto-squelch back on.
21-1825.fm Page 12 Friday, March 3, 2000 12:32 PM