Binatone CJ-200 - Manual (Page 5)

5
ENGLISH
SPECIAL SAFETY MEASURES
Before switching on the citrus juicer, check that all
the parts are properly assembled.
During disassembly and assembly of the citrus
juicer do not apply excessive force, as it can cause
the breakdown of the appliance.
The continuous operation of the citrus juicer should
not exceed one minute. If you are squeezing a lot of
fruit, we recommend resting the citrus juicer for a 15-second’s
break every 15 seconds of the operation of the appliance. In this
case the total time of juicing should not exceed 10 minutes.
Before disassembling the appliance make sure that the spout for
juice discharge is raised up and locked.
Do not touch the rotating parts of the citrus juicer during its opera-
tion.
Before disassembling and cleaning the appliance, always discon-
nect it from the power supply.
Clean the citrus juicer as soon as you have finished juicing.
DESCRIPTION OF THE
APPLIANCE
Figure A:
1. Protective lid
2. Pressing cone
3. Upper filter
4. Lower filter
5. Juice pitcher
6. Drive shaft
7. Body
BEFORE USE
Wipe the appliance casing with a damp lint free
cloth.
Wash and then thoroughly dry the removable
parts of the appliance.
Assemble the citrus juicer.
OPERATING INSTRUCTIONS
Appliance assembly
1. Place the appliance body (7) on a dry and level
surface.
2. Put the juice pitcher (5) on the appliance body
(6) and fix the pitcher by turning it clockwise.
3. Insert the lower filter (4) into the upper filter (3),
put them on the juice pitcher (5). Put the pressing