Ryobi 325HE3X-series - Manual (Page 2)

2 – English
KEY TO SYMBOLS
Symbols
WARNING!
Incorrect or careless use of a hedge trimmer
can turn it into a dangerous tool that can
cause serious or even fatal injury. It is
extremely important that you read and
understand the contents of this operator’s manual.
Always wear:
• Approved hearing protection
• Protective goggles or a visor
This product is in accordance with applicable
EC directives.
Cutting tool. Do not touch the tool without
first switching off the engine.
This machine is not electrically insulated.
If the machine touches or comes close to
high-voltage power lines it could lead to
death or serious bodily injury. Electricity
can jump from one point to another by
arcing. The higher the voltage, the
greater the distance electricity can jump.
Electricity can also travel through
branches and other objects, especially if
they are wet. Always keep a distance of at
least 10 m between the machine and high-voltage power lines
and/or any objects that are touching them. If have to work
within this safe distance you should always contact the
relevant power company to make sure the power is switched
off before you start work.
This machine can be dangerous! The operator of the machine
must ensure, while working, that no persons or animals come
closer than 15 metres.
Arrows which show limits for handle
positioning.
Always wear approved protective gloves.
Wear sturdy, non-slip boots.
Noise emission to the environment according
to the European Community’s Directive. The
machine’s emission is specified in chapter
Technical data and on label.
Other symbols/decals on the machine refer to special
certification requirements for certain markets.
Switch off the engine by moving the stop
switch to the STOP position before carrying
out any checks or maintenance.
Always wear approved protective gloves.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must be worn.