Roberts Radio R9995 - Manual (Page 18)

17
Presetting stations
There are 5 memory presets for each waveband FM1, FM2 and MW.
1. Switch on your radio by pressing the Power button.
2. Tune to the required station using one of the methods previously
described.
3. Press and hold down the required Memory Preset button until a
beep is heard (via earphones) and the preset number appears in
the display and the station will be stored under the chosen preset
button.
4. Repeat this procedure for the remaining presets.
5. Stations stored in preset memories may be overwritten by following
the above procedure.
Recalling preset stations
There are 5 memory presets for each waveband.
1. Switch on your radio by pressing the Power button.
2. Select the required waveband by repeatedly pressing the Band
button.
3. Momentarily press the required Memory Preset button, the preset
number and station frequency will appear in the display.