Revox Re:source MK3 - Manual (Page 20)

5.1 Decoder Module 3 Re:source
19
Speaker settings
Main speaker
The settings Large, Small and
Digital are available here.
Optically, the status of the
speakers is shown in the
display with the symbol
or
.
Center speaker
The Center can also be
configured as Large, Small or
None. With the None setting,
the Center signal is split
between the two front speakers.
Optically, the status of the
speaker is shown in the display
with the symbol
.
Surround speakers
The surround speakers can also
be configured as Large, Small
or None. With the None setting,
the surround signal is split
between the two front speakers.
Optically, the status of the
speakers is shown in the
display with the symbol
or
.
Subwoofer
Using the Subwoofer menu,
you can setup the operation of
an active subwoofer in the
whole speaker concept.
By repeatedly pressing the
Subwoofer key, you will reach
the menus shown where you
can make the appropriate
settings for your use.