Roberts Radio R984 - Manual (Page 5)

If you need any further advice, please call our Technical Helpline on
0181 758 0338 (Mon-Fri)
Waveband selector switch
For MW and LW reception set the waveband switch (7) to the "MW/
LW" position. Select the required MW or LW band by using the MW/
LW switch (11).
For FM stereo reception set the waveband switch (7) to the "FM ST"
position. If the FM signal becomes weak or is accompanied by a high
level of background hiss, you may select MONO mode by setting the
switch to the "FM" position.
Tuning Control
Slowly rotate the tuning control (8) to select the desired station.
Tuning Indicator
The tuning indicator (3) will light up when a station is correctly tuned.
Note : the tuning indicator may not light up when receiving a weak
station or if the batteries are low.
Stereo Indicator (FM only)
When a station being received is in stereo the stereo Indicator (4) will
light up.
Dial Pointer
Rotate the tuning control until the dial pointer (6) corresponds to the
frequency of the desired station.
Volume Control
Adjust the volume control (1) to the desired level of sound. Rotating
the control clockwise will increase the sound level.
4