Connections & setup, Buttons on the remote control, 8chapter 1 – RCA 15956220 User Manual
Page 10

8
Chapter 1
Connections & Setup
DISPLAY
MUTE
INPUT
SKIP
VOL
VOL
CHAN
CHAN
MENU
CLEAR
RESET
PREV CH
POWER
1
3
2
4
6
5
7
9
8
0
CRK10A2/240959
Buttons on the Remote Control
0-9 (Number buttons)
Enter channel numbers and time settings directly
through the remote control.
To enter a two-digit channel, press the two digits. To enter a three-digit channel,
press and hold the first digit for two seconds until two dashes appear to the right
of the number, then add the second two. Example: to tune to channel 123, press
and hold 1 for two seconds, press 2, then press 3.
CHAN (up and down) buttons
Scan up or down through the current channel
list. Press once to change the channel up or down; press and hold to continue
changing channels. Also used as up and down arrows in the menu system.
CLEAR
Removes any menu or display from the screen and returns you to
TV viewing. Also cancels SKIP timer.
DISPLAY
Displays channel information. This button is also referred to as INFO
in the TV’s menu system.
INPUT
Changes to your TV to its video input channel. The Video Input
Channel is the channel your TV must tune to in order for you to access a
component that’s connected to your TV’s front panel jacks. Example: to view a
tape from your camcorder, connect the camcorder to the TV’s front panel
VIDEO and L/MONO and R Audio jacks with the audio/video cables.
MENU
Displays the TV’s Main menu. When in the menu system, selects
highlighted items or returns you to the previous menu.
MUTE
Lowers the volume to its minimum level. Press again to restore volume.
POWER
Turns the TV on and off.
PREV CH
Returns you to the previous channel.
RESET
Resets original settings in several control panels.
SKIP
If you press this button before you change the channel, the TV waits 30
seconds and automatically goes back to the original channel. Each time you
press SKIP, you add 30 seconds (i.e, if you press SKIP two times before you
change the channel, the TV waits 60 seconds and automatically turns back to
the original channel). Press CLEAR to cancel the SKIP timer.
VOL (up and down) buttons
Decrease or increase the TV’s volume. Also used as
left and right arrows in the menu system.
F27441.01 Setup
5/23/02, 9:11 PM
8