RIDGID R932 - Manual (Page 2)

R9223 Specifi cations Features Includes Weight
23953 HAMMER DRILL: HAMMER DRILL: R8411503 Hammer drill, R8452 circular Kit Weight: 46 lbs.
18V 5 Pc. Kit Volts: 18 • High Impact Torque Adjustment Ring, 24 Position Clutch – for saw, R8442 reciprocating saw, R842301 impact
w/2500 Cell Chuck: 1/2" carbide locking jaws durability and lighter weight driver, R849 light, 1 bulb, 30 minute dual port
Batteries No Load Speeds: 0-450/0-1600 RPM; • Locking Single Sleeve Carbide Chuck – to hold bits secure charger, 2 batteries, auxiliary handle assembly,
0-7200/0-25,600 BPM • Automatic Spindle Lock – makes bit changes easier hex key, double ended screwdriver bit, single
• High Speed Gearbox with Hammer Function – for masonry ended impact driver bit, edge guide, circ. saw blade,
Clutch: 24 position and concrete work 2 reciprocating blades, operator’s manual and
Torque: 585 In.-Lbs. • High Torque 2-Speed Transmission – for matching power to the task heavy duty bag
• Max 2.5 High Capacity Battery – for maximum run time
RECIPROCATING SAW: RECIPROCATING SAW:
Volts: 18 • Toolless Blade Clamp – for quick blade changes
Stroke: 1 3/16" • Pivoting Shoe – adjusts for cuts at almost any angle
No Load Speeds: 0-2500 SPM • Overmold Front Body and Grip – for added comfort
• Variable Speed Switch with Brake – for the right speed to suit the task
CIRCULAR SAW: CIRCULAR SAW:
Volts: 18 • Aluminum Guard and Base – for high strength and low weight
Arbor Size: 5/8" • 6 1/2" Carbide Tipped Blade – for increased cutting capacity
Blade Size: 6 1/2" • Spindle Lock – for easier blade changes
No Load Speed: 2500 RPM • Double Reduction Gearing – for increased torque
Cutting Depth: 2 1/8" @ 0°
IMPACT DRIVER: IMPACT DRIVER:
Volts: 18 • 1/4" Hex Quick Coupler – makes bit changes quicker and easier
Coupler: 1/4" hex quick coupler • Die Cast Gearbox – for durability and repeatability
No Load Speeds: 0-2400 RPM • High Torque Output – for the most diffi cult driving tasks
Torque: 1450 In.-Lbs.
Impacts per Minute: 0-3,100
LIGHT: LIGHT:
Volts: 18 • 180° Rotating Head – allows aiming light where needed
Bulb: .6 amp xenon • Beam Adjustment Ring – direct light beam from spot to fl ood
R81030 Specifi cations Features Includes Weight
24598 Volts: 9.6 • Die Cast Torque Adjustment Ring – with 16 settings for Pivoting Screwdriver, 2 battery packs, 20 minute Tool Weight:
9.6V Pivot Driver Torque: 100 In.-Lbs. driving and drilling charger, 1 single ended impact bit, operator’s
Collet Size: 1/4" hex • Ergonomic Two Finger Switch – for comfort and ease of operation manual and bag
No Load Speed: 0-530 RPM • Variable Speed Switch – allows easy starts for driving and drilling
Charger: 20 minute • 1/4" Quick Coupler – for quick bit changes
• Die Cast Gear Box – for greater reliability and dependability
• Compact Pivoting Body – allows use in either straight or pistol
grip orientation
• Overmold Handle – for more comfortable operation
R82233 Specifi cations Features Includes Weight
20583 Volts: 12 • Mar-Resistant Head Cover – helps protect workpiece from Right angle impact driver, 1 battery pack, Tool Weight: 4.3 lbs.
12V Right Angle Collet Size: 1/4" hex • Compact Right-Angled Head – allows close-quarters operation 20 minute charger, 1 single-ended impact bit,
Impact Driver No Load Speeds: 0-2,200 RPM • 1/4" Quick Coupler – for quick and easy bit changes operator’s manual and bag
Impacts per Minute: 0-3,100 • Die Cast Gear Box – for greater reliability and dependability
Max. Torque: 700 In.-Lbs. • High Torque Motor and Gear Box Design – the power to complete
Charger: 20 minute the task
• Variable Speed Paddle Switch – slow, easy starts and fast fi nishes
• Ergonomic Overmold Handle and Switch – for more comfortable operation
• Slide Stop Pads – for mar resistance on delicate surfaces
R82320 Specifi cations Features Includes Weight
20588 Volts: 14.4 • Compact Size – fi ts into tight spaces Impact driver, 1 battery pack, 20 minute Tool Weight: 4.3 lbs.
14.4V Impact Driver Collet Size: 1/4" hex • Tremendous 1,400 In.-Lbs. of Torque charger, 1 single-ended impact bit, operator’s
No Load Speeds: 0-2,850 RPM • 1/4" Quick Coupler – for quick and easy bit changes manual and case
Impacts per Minute: 0-2,800 • Die Cast Gear Box – for more rugged, reliable and dependable operation
Max. Torque: 1400 In.-Lbs. • High Torque Motor and Gear Box Design – the power to complete the task
Charger: 20 minute • Variable Speed Switch – for delicate starts and stops
• Ergonomic Overmold Handle and Switch – for comfort and ease of operation
• Slide Stop Pads – for mar resistance on delicate surfaces
R820011 Specifi cations Features Includes Weight
23973 Volts: 12 • 24 Position Torque Adjustment Ring – fi ner adjustment and repeatability Drill, 20 minute charger, 2 battery packs, Tool Weight:
12V 2 Sp. Drill Torque: 350 In.-Lbs. • 2-Speed Transmission – the right power to complete the job screwdriver bit, operator’s manual and bag
Chuck: 3/8" • Total Grip Overmold – for improved grip and comfort
• Slide Stop Pads – for mar resistance on delicate surfaces
• Single Sleeve Locking Chuck – to hold bits securely
• High Impact Clutch Adjustment Ring – designed for durability and
lighter weight
• Self-Ejecting Battery Pack – automatically disconnects in direction to be
removed when release buttons are pressed
Power Tools