Connections and setup, Mounting your tv to the wall, Attaching your tv’s base – RCA L15D20 User Manual
Page 7
Connections and Setup
Chapter 1
7
Mounting Your TV to the Wall
Caution:
The wall mount must bear a minimum of fi ve times
the TV’s net weight without causing damage.
To mount your TV to the wall you need to purchase a VESA wall
mount. Purchase a VESA 100 x 100, M4 x 10mm (100 x 100 means
the mounting measurements are 100mm horizontally and 100mm
vertically; M4 x 10mm is the type of screw).
1. If the base is attached, you need to remove it before attaching the
wall mount.
A. Place the TV facedown on a surface that is soft, yet strong
enough to hold the TV.
B. For model L15D20, push in on the tab at the back of the base
and remove the base from the TV.
For model L19WD20, remove the three screws from the bottom
of the base. Then, squeeze the two tabs on the bottom of the
base and remove the base from the TV.
C. Use a screwdriver to remove the screws from the holes as the
picture indicates to the left. Model L15D20 has three screws;
model L19WD20 has four screws.
Remove the screws that attach to the TV's
base attachment.
Wall mount holes
Attaching Your TV’s Base
Your TV comes shipped without the base attached so that you can
choose to mount your TV either to its base or to a wall (wall mount
sold separately). If you want to mount your TV to the wall, don’t
attach the base and instead follow the Mounting Your TV to the Wall
instructions below.
1. Locate the base. For model L19WD20, also locate the three screws.
2. For model L15D20, pick up the TV and align it so that the lock tab
on the base matches with the tab opening on the back of the TV.
For model L19WD20, the screw holes underneath the TV match
with the screw holes inside the base.
Push down on the top of the TV until it clicks into the base.
3. For model L19WD20, attach the three screws to the bottom of the
base as the picture to the left shows.
Model L19WD20 bottom of the base
Model L19WD20
Model L15D20
2. Make sure all cables are already connected to the TV.
3. Attach the wall mount to the TV using the four holes on the TV's
back panel, as indicated in the picture to the left.
4. Follow the directions included with the wall mount to mount the
TV to the wall.
Model L15D20 tab
Model L19WD20 tabs
16733890.indb 7
16733890.indb 7
12/6/06 11:27:28 AM
12/6/06 11:27:28 AM