RUSSELL HOBBS RHM2018 - Manual (Page 8)

1
TURNTABLE INSTALLATION
Glass turntable(6), to be placed on the turntable support ring
a. Never place the glass turntable (6) upside down. The turntable should
never be restricted in movement.
b. Both glass turntable (6) and turntable support ring (3) must always be
used during cooking.
c. All food and containers of food should always be placed on the glass
turntable for cooking.
d. The glass turntable rotates clockwise or anti-clockwise randomly, this
is normal.
e. If glass turntable or turntable support ring cracks or breaks, contact
your nearest authorized service centre.
INSTALLING YOUR OVEN
Carefully remove all packaging materials and accessories.
Examine the oven for any damage such as dents or broken door.
Do not install if oven is damaged in any way.
Cabinet : Remove any protective film found on the outer surface.
Do not remove the light brown mica cover that is screwed onto the inner side of the microwave to protect
the magnetron.
INSTALLATION
1. Select a level surface that provides enough clear space for the intake and / or outlet vents (see fig.3).
A minimum clearance if 3.0 inch (7.5cm) is required between the oven and any adjacent wall. One side
must be clear.
1. Leave a minimum clearance of 12 inch (330) above the oven.
2. Do not remove the feet from the bottom of the oven.
3. Blocking the inside and/or outlet openings can damage the oven.
Change the unit image.
(3)
(6)