2 access via cli, Command line interface (cli), Access via cli – RCA TM580 User Manual

Page 20: For more information, see, 2 access via, Chapter 1

Text mode
Original mode

Chapter 1

Your SpeedTouch™

E-DOC-CTC-20050429-0102 v1.0

1.3.2 Access via CLI

Command Line

Interface (CLI)

You can access the Command Line Interface (CLI) via:

A Telnet session
This requires that TCP/IP connectivity exists between the host from which the
Telnet session is opened and the SpeedTouch™. Your SpeedTouch™ and the
connected PC must have an IP address in the same subnet.

Quote site commands (over FTP)
For more information, see

“ Quote site command” on page 16

For information on CLI commands, see the SpeedTouch™ CLI Reference Guide.