Ricoh 33-1196 - Manual (Page 3)

Charging Rechargea
ble Batte
ries
3
If the headphones’ range decreases, you do not hear sound
from the audio source, or the headphones’ POWER/BATT
LOW indicator is blinking, replace the alkaline batteries or
recharge the rechargeable batteries.
Rý
%*#4)+0)"4'%*#4)'#$.'"
$#66'4+'5
Your transmitter has a built-in charger to charge
rechargeable batteries. When the headphones are not in
use, the rechargeable battery can be continuously charged
over several days. The batteries can be charged with the
transmitter set to on or off.
1. Turn off the headphones and remove the battery
compartment cover on the left earpiece. #"
2. Select ALK/RCH to RCH .
3. Place the rechargeable batteries in the compartment
according to the polarity symbols (+ and –) marked in
the compartment.
4. Replace the cover.
5. Lift the charging compartment cover on the back of
transmitter to open and pull out the charging cord.
.# .# .# .#
6. Plug the charging barrel plug into the DC IN 4.5V jack on
the left earpiece.
R
"9#40+0) ý
R
"
Dispose of old batteries promptly
and properly. Do not burn or bury
them.
#
"+/2146#06"
#
You can only charge rechargeable
batteries. Do not attempt to charge
alkaline batteries.
.
"%#76+10"
.
The charging compartment cover
on the transmitter is hinged. Do not
attempt to remove it.
Red
White
DC IN 12V
Charging
Cord
DC IN 4.5V
Phono to 1 / 8 inch
Stereo Adapter
1 / 8 to 1 / 4 inch
Stereo Adapter