Rosen Entertainment Systems DS-VW0710VW - Manual (Page 3)

Installation Guide VW Series
Rosen Entertainment Systems Copyright 2010 All Rights Reserved
Installation Guide DP-VW0714HD Rev E
Page 3
REMOVE THE FACTORY RADIO
You will need to remove multiple interior trim components prior to removing the factory radio.
The following steps will help guide you through this process.
STEP
2
Remove Upper Dash/Vent Trim
Use a thin pry tool to carefully lift the Upper grill. Use
Caution, the plastic is fragile and excess force can break
or damage trim
CAUTION
Remove the Inner Trim / Vent Components
Remove 3 x T-20 Torx screws to release the inner Trim /
Vent components.
Remove the Radio Surround Trim
Remove 2 x T-20 Torx screws to release Radio Surround
Trim
Remove the Radio Mounting Screws
Remove 4 x T-20 Torx screws to release the radio
Remove OEM Radio from Dash and
Unplug Factory Harness
Carefully slide the radio out, and release the main
connector block and antenna connectors
CAUTION