Roberts Radio Classic DAB User Manual

Page 21

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)

System reset

If your radio fails to operate correctly, or some digits on the display are
missing or incomplete carry out the following procedure.

1. Press

the

On/Off button to switch on the radio.

2. Press and release the Station/Menu button and then rotate the Tuning/

Select control until 'SYSTEM' appears on the display.

3. Press

the

Tuning/Select control and rotate the control until the display

shows 'FACTORY'.

4. Press

the

Tuning/Select control so that the display shows 'RESET'

and then press Tuning/Select control again.

5. A full reset will be performed. The station list and presets will be erased.

The display will show 'RESTART' then 'WELCOME' and after a few
seconds a station scan search will be performed automatically. The
display will show the progress of the station search, for example '>>>>
18'. The number on the right of the display is the number of stations
that have been found.

In case of malfunction due to electrostatic discharge, reset the product
as above to resume normal operation. If you are not able to perform the
reset operation as above, removal and reconnection of the power supply
and batteries may be required.

If a problem persists our technical staff would be pleased to offer
any assistance on operating the radio. Our technical helpline number
is 020 8758 0338.

2-4