Rosewill RNX-N400LX - Manual (Page 31)

Wireless Router RNX-N400LX User Manual
Item Description
IP Address
If you select the Set Static DHCP on LAN interface, fill in the IP
address for it.
MAC Address
If you select the Set Static DHCP on LAN interface, fill in the MAC
address for it.
Comment Fill in the comment tag for the registered Static DHCP.
Apply Changes
Click the Apply Changes button to complete the new configuration
setting.
Reset
Click the Reset button to abort change and recover the previous
configuration setting.
Static DHCP List It shows IP Address MAC Address from the Static DHCP.
Delete Selected
Click to delete the selected clients that will be removed from the
Static DHCP list.
Delete All Click to delete all the registered clients from the Static DHCP list.
Reset
Click the Reset button to abort change and recover the previous
configuration setting.
3.42 WAN Interface Setup
This part is used to configure the parameters for wide area network that connects to the
WAN port of your WLAN Broadband Router. Here you may change the access method
to Static IP , DHCP , PPPoE or PPTP by click the item value of WAN Access Type.
3.421 WAN Interface Setup - Static IP
31