Roberts Radio RD-6 - Manual (Page 19)

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
18
Using the remote control
The buttons on the remote control have the same functions as front panel
controls with two exceptions:-
1. Mute - press this button to mute sound, press again to restore
sound.
2. StandBy - press this button to place unit in StandBy mode, your radio
will enter power down state but the clock will remain active. The StandBy
indicator will light.
If the front panel On/Off button is pressed during StandBy your radio will
switch off and clock display will not be visible.
Note: the front panel On/Off control will return unit to its previous state
prior to the On/Off button being used i.e. If radio is in StandBy mode and
On/Off button is used to switch off radio - when On/Off button is used
to switch back on radio will power up in StandBy mode.
or
If radio is in On mode and On/Off button is used to switch off radio -when
On/Off button is used to switch back on radio will power up in On mode.
1
2
rd-6 instruction book.pmd 2/26/2004, 8:54 AM 19