Roberts Radio RD-10 User Manual

Page 9

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

Finding new stations - DAB

As time passes new stations may become available. To find new stations
proceed as follows:-

1. Press and release the AutoTune button, the display will show

"Autotune Quick Scan". Your radio will perform a scan of the UK DAB
frequencies. As new stations are found the station counter on the
right-hand side of the display will increase and stations will be added
to the list

2. To carry out a full scan of the entire DAB Band III frequencies press

and hold down the AutoTune button for more than 2 seconds and
then release. The display will show "Autotune Full scan". As new
stations are found the station counter on the right-hand side of the
display will increase and stations will be added to the list

Autoselect - DAB

As an alternative to pressing the tuning control to select a station your
radio can be set to automatically select a station.

1. Rotate the Tuning control a few clicks in either direction, imme-

diately press and hold in the tuning control until the display shows
"Autoselect ON".

2. Rotate the Tuning control until the station you require is visible on

the display, after a few seconds your radio will automatically select
the station shown on the display.

3. To switch off Autoselect rotate the Tuning control a few clicks in

either direction, immediately press and hold in the Tuning control
until the display shows "Autoselect OFF".