Maintenance, Warning – Ryobi HPL50 User Manual

Page 16

■ Force the old belt from the small pulley by turning in

the direction shown. As you turn the belt, pull and
work it off the small pulley until it has been com-
pletely removed from both pulleys.

■ Install the new belt over the large pulley. As you turn

the belt, push and work it onto the small pulley until
it is in place.

■ Replace the belt cover. Install belt cover screw and

tighten securely.

SMALL PULLEY

LARGE PULLEY

Fig. 23

BELT COVER

SCREW

BELT COVER

Fig. 24

BELT REPLACEMENT

See Figures 23 and 24.

When replacing the belt, use recommended replacement
belt only, Ryobi part number HPL50K-03.
■ Unplug your planer.

WARNING:

Failure to unplug your planer could result in
accidental starting causing serious injury.

BELT

MAINTENANCE

■ Remove belt cover screw, then remove the belt cover.