Pc connection, Viewingpicture from connected device, Viewing pc – RCA 31Series User Manual

Page 15

Connections and Setup

Chapter 1

PC Connection

This is an example of a connection using the PC VIDEO jack. Go

page 14

for specific

instructions.

ViewingPicture from Connected Device

1. Plug in the TV (see

page 16

for details) and the device, if they aren't already plugged in.

2. Turn on the TV and the device you want to view, for example a DVD player.

Repeatedly press the INPUT button on the remote control to select VID (if connected

to the VIDEO INPUT jacks), CMPT (if connected to the CMPT jacks) or HDMI (if

connected to the HDMI/DVI jack)

displayed at the top of the TV's screen. To go back to

viewing TV channels, use the number buttons to enter the channel you want to view.

Note:

If the picture from the DVD player appears black and white and your device is connected to

the VIDEO INPUT, you might be tuned to the wrong input. Make sure you press INPUT until you

select

VID, CMPT or HDMI

displayed at the top of the TV's screen.

Note:

•

If you're done connecting devices to your TV, go to

page 17

to complete the Initial Setup.

•

To continue connecting devices, go to the next page.

Viewing PC

1. Plug in the TV and the PC, if they aren't already plugged in.

2. Turn on the TV and the PC.

3. Repeatedly press the INPUT button on the remote control until you select PC displayed at

the top of the TV's screen. To go back to viewing TV channels, use the number buttons to

enter the channel or press CH+ or CH- buttons.

Note:

If you're done connecting devices to your TV, go to page 21 to complete the Initial Setup.

Don’t forget:

If necessary, connect

antenna or cable to get

a picture. Go to page

for instructions.