Radio Shack 20-501 - Manual (Page 32)

Beyond the Basics 32
Signal Stalker might not find the transmission
you are searching for, or it might find a transmis-
sion other than the one you are searching for.
• Signal Stalker cannot detect satellite dishes or
any transmitter with a frequency above or below
the frequency ranges listed under “setting the
signal stalker options” on Page 32.
• Signal Stalker works better with some types of
transmissions than others. It might not correctly
display frequency information for transmitters
using a highly directive antenna (such as an
amateur radio beam antenna), if there are many
transmitters operating at the same time in the
same area, or if the transmitter is a broadcast
television station.
setting the signal stalker options
Press FUNC and then press and hold for 2
seconds. One of the following signal stalker
options appears...
S-S.bnd: Lets you select the signal stalker band.
S-S.ALt: Lets you select the signal stalker alert
settings.
Repeatedly press or to select the option
you want, then press E.