RBH Sound MC - Manual (Page 8)

TROUBLESHOOTING
No sound from speakers
No sound from one speaker
Very little bass and/or imaging
Speaker wire not connected
Speaker selector on amplifier is
not on
Balance control not completely
centered
Speaker wire not connected
Speakers are wired out of phase
Make sure wire is connected
at both the speaker and the
amplifier observing polarity
Activate proper selector on
amplifier
Place balance control in the
center
Check all connections at the
amplifier and speakers
Check entire system for proper
polarity and make adjustments
as necessary
Problem Possible Cause Remedy
C A R E & C L E A N I N G
o maintain speaker appearance, we recommend an occasional application of
furniture grade polish to the wood surface of the cabinet. To clean dust
from the grille cloth, use a vacuum with a brush attachment.
6