Rosewill RSV-R26 - Manual (Page 4)

Server RSV-R26 User Manual
Step 4 (type1)
Install the latches onto the front-side of the pillar of a rackmount cabinet.
Use M5 x 8L screws to
secure the L brackets onto
the latches (4 places).
Please align the screw
holes on the pillar with the
screw holes on the
brackets.
Attention:
1.
Adjust the brackets according to the width of the cabinet.
2. Make sure to align the 2 slide rails on the rackmount and secure the brackets on to the
outer slide rails via screws.
3. Make sure that the 2 sliding rails are at the same height. ( The positions of the screw
holes must be identical as well.)
Step 4 (type2)
Install the latches onto the profile of the pillar of a rackmount cabinet.
Use M5 x 8L screws to secure the brackets
together with the latches to the cabinet
rackmount. The setup is similar to type 1
4