Radio Shack TFX-1032 - Manual (Page 13)

13
1. Press MENU four times. The fax
machine displays:
2. Press SET . Then press MENU once.
The fax machine displays:
3. Press SET . The fax machine dis-
plays the first 10 characters of the
name (or nothing if no name is
set) and the letters A-E.
The blinking block in the left of the
display indicates where the next
letter enters. The underscore indi-
cates the selected letter.
4. Repeatedly press 5 to select the
group with the letter you want to
enter. Then press
2 or 8 to go up
or down to the line with the letter.
Finally, press
4 or 6 to position the
underline under the letter.
5. Press to enter the letter.
Note: If you accidentally enter a
wrong character, press
once,
then press DELETE and enter the
correct character.
6. Repeat Steps 4 and 5 to enter the
complete name (up to 24 charac-
ters).
7. Press SET to store the name. The
fax machine briefly displays:
Then the display blanks or dis-
plays the currently set telephone
number.
8. Use the keypad to enter the fax
machine’s phone number (up to
20 digits). To enter a dash, press
SPEED DIAL .
9. Press SET to store the phone num-
ber. Then press STOP/CLEAR .
Here is an example.
Follow these steps to enter My Co. as
the name and 817-555-1931 as the
phone number.
Note: Watch the display as you do this
example.
1. Press MENU four times, then press
SET , MENU , SET .
2. Press 8 twice.
3. Press 6 twice.
Group 1 Group 2 Group 3
ABCDE abcde 12345
FGHIJ fghij 67890
KLMNO klmno .,:;•
PQRST pqrst +–/&*
UVWXY uvwxy #’ "()
Z z < >!?=
4:SET MODE ?
2:STATION CODE ?
:ABCDE
STATION TEL No.?
43-1204.fm Page 13 Wednesday, August 18, 1999 8:45 AM