Roberts Radio Gemini 55 RD-55 - Manual (Page 14)

Operating your radio - Search tuning FM
1. Fully extend the telescopic aerial for FM reception.
2. Press the On/Off button to switch on your radio. The display will
show "Roberts" for a few seconds.
3. Press the Band button to select the FM band.
4. Press and immediately release the Auto tune button, your radio will
scan in an upwards direction (low frequency to high frequency) and
stop automatically when it fi nds a station of suffi cient strength.
5. After a few seconds the display will update. The display will show the
station name.
6. To fi nd other stations, press and release the Auto tune button as
before.
7. To scan the FM band in a downwards direction (high frequency to low
frequency) press and hold down the Auto tune button for 0.5 seconds
and then release.
8. When the waveband end is reached your radio will recommence tuning
from the opposite waveband end.
9. Adjust the Volume control to the required setting.
10. To switch off your radio press the On/Off button.
2
4
6,7
9
3
13