Double insulated, Service, Model no – Ryobi G1151C User Manual
Page 14: Extension cord caution
OWNER'S OPERATING MANUAL
4-1/2 in. (115 mm) Angle Grinder
Model G1151C /
Double Insulated
972000-387
1-97
Printed in U.S.A.
RYOBI AMERICA CORPORATION
5201 Pearman Dairy Road
Anderson SC 29625-8950
Post Office Box 1207
Anderson SC 29622-1207
Phone 1-800-525-2579
RYOBI CANADA INC.
P.O. Box 910
Cambridge, Ontario N1R 6K2
Phone 1-800-265-6778
EXTENSION CORD CAUTION
When using a power tool at a considerable distance from a power
source, be sure to use an extension cord that has the capacity to
handle the current the tool will draw. An undersized cord will cause
a drop in line voltage, resulting in overheating and loss of power.
Use the chart to determine the minimum wire size required in an
extension cord. Only round jacketed cords should be used.
When working with a tool outdoors, use an extension cord that is
designed for outside use. This is indicated by the letters "WA" on
the cord's jacket.
Before using any extension cord, inspect it for loose or exposed
wires and cut or worn insulation.
**Ampere rating
(on tool data plate)
0-2.0
2.1-3.4
3.5-5.0
5.1-7.0
7.1-12.0 12.1-16.0
Cord Length
Wire Size (A.W.G.)
25'
16
16
16
16
14
14
50'
16
16
16
14
14
12
100'
16
16
14
12
10
—
CAUTION: Keep the extension cord clear of the working
area. Position the cord so that it will not get caught on workpiece,
tools, or other obstructions while you are working with a power
tool.
**Used on 12 gauge - 20 amp circuit.
• SERVICE
Now that you have purchased your tool, should a need ever exist for repair parts or service,
simply contact your nearest Ryobi Factory Service Center. Be sure to provide all pertinent
facts when you call or visit. Please refer to the Service Center insert or call 1-800-525-2579
in the United States or 1-800-265-6778 in Canada for your nearest Factory or Authorized
Service Center.
• MODEL NO.
The model number of your tool will be found on a plate attached to the motor housing.
Please record the model number and serial number in the space provided below.
•
MODEL NUMBER G1151C
•
SERIAL NUMBER