Operating your radio – Roberts Radio R9903 User Manual
Page 5

If you need any further advice, please call our Technical Helpline on :-
0181 758 0338 (Mon-Fri)
4
Operating your radio
1.
Turn on your radio by rotating the Volume control clockwise until a
click is heard. The Power LED will light up
2.
Set the Waveband selector to the required waveband.
3.
Adjust the Volume control until a hissing sound is heard.
4.
Rotate the Tuning knob to select the desired station. On MW and LW
the Tuning scale is marked in kilohertz (kHz). On FM the Tuning
scale is marked in Megahertz (MHz)
5.
For MW and LW reception rotate your radio to the position giving best
reception.
6.
For FM reception fully extend the Telescopic aerial and then angle and
rotate for best reception. A knuckle joint at the base of the aerial allows
this movement and an angle of 45 degrees will usually be satisfactory.
6.
Adjust the Volume control to the required sound level.
7.
To turn off your radio rotate the Volume control fully anticlockwise
until a click is heard.
Note : The telescopic aerial is inoperative on MW and LW.
3 Band Portable Radio
R 9 903
T u n in g
P o w e r
0
S c a l e
1
2
1 0
9
3
4
8
5
7
6
53 0
150
60 0
180
160
20 0
80 0
700
22 0
100 0
26 0
28 0
12 00
1600
1400
kH z
kH z
M W
LW
FM
88
96
92
100
104
106
108
MH z
Volume
LW M W F M