Roland CUBE 40XL - Manual (Page 3)

2
WARNING
(for CUBE-80XL only)
Connect mains plug of this model to a mains
socket outlet with a protective earthing
connection.
Do not open or perform any internal modifica-
tions on the unit.
Do not attempt to repair the unit, or replace
parts within it (except when this manual
provides specific instructions directing you
to do so). Refer all servicing to your retailer,
the nearest Roland Service Center, or an
authorized Roland distributor, as listed on the
“Information” page.
Never install the unit in any of the following
locations.
• Damp (e.g., baths, washrooms, on wet floors);
or are
• Exposed to steam or smoke; or are
• Subject to salt exposure; or are
• Humid; or are
• Exposed to rain; or are
• Dusty or sandy; or are
• Subject to high levels of vibration and
shakiness.
Make sure you always have the unit placed
so it is level and sure to remain stable. Never
place it on stands that could wobble, or on
inclined surfaces.
The unit should be connected to a power
supply only of the type described as marked
on the rear side of unit.
Do not excessively twist or bend the power
cord, nor place heavy objects on it. Doing
so can damage the cord, producing severed
elements and short circuits. Damaged cords
are fire and shock hazards!
This unit, either alone or in combination with
an amplifier and headphones or speakers,
may be capable of producing sound levels
that could cause permanent hearing loss. Do
not operate for a long period of time at a high
volume level, or at a level that is uncomfort-
able. If you experience any hearing loss or
ringing in the ears, you should immediately
stop using the unit, and consult an audiologist.
Do not place containers containing liquid on
this product. Never allow foreign objects (e.g.,
flammable objects, coins, wires) or liquids (e.g.,
water or juice) to enter this product. Doing so
may cause short circuits, faulty operation, or
other malfunctions.
WARNING
Immediately turn the power off, remove the
power cord from the outlet, and request servic-
ing by your retailer, the nearest Roland Service
Center, or an authorized Roland distributor, as
listed on the “Information” page when:
• The power-supply cord or the plug has been
damaged; or
• If smoke or unusual odor occurs
• Objects have fallen into, or liquid has been
spilled onto the unit; or
• The unit has been exposed to rain (or
otherwise has become wet); or
• The unit does not appear to operate
normally or exhibits a marked change in
performance.
In households with small children, an adult
should provide supervision until the child is
capable of following all the rules essential for
the safe operation of the unit.
Protect the unit from strong impact.
(Do not drop it!)
(for CUBE-80XL only)
A small amount of heat will radiate from the
unit during normal operation. Do not use the
unit in an area with less than the air space
shown below.
30 cm (12 in.)
or greater
20 cm (8 in.)
or greater
20 cm (8 in.)
or greater
5 cm (2 in.)
or greater
15 cm (6 in.)
or greater
Front Side
Do not force the unit’s power-supply cord to
share an outlet with an unreasonable number
of other devices. Be especially careful when
using extension cords—the total power used
by all devices you have connected to the
extension cord’s outlet must never exceed the
power rating (watts/amperes) for the extension
cord. Excessive loads can cause the insulation
on the cord to heat up and eventually melt
through.
Before using the unit in a foreign country,
consult with your retailer, the nearest Roland
Service Center, or an authorized Roland
distributor, as listed on the “Information” page.
CAUTION
The unit should be located so that its location
or position does not interfere with its proper
ventilation.
Always grasp only the plug on the
power-supply cord when plugging into, or
unplugging from an outlet.
At regular intervals, you should unplug the
power plug and clean it by using a dry cloth to
wipe all dust and other accumulations away
from its prongs. Also, disconnect the power
plug from the power outlet whenever the unit
is to remain unused for an extended period of
time. Any accumulation of dust between the
power plug and the power outlet can result in
poor insulation and lead to fire.
Try to prevent cords and cables from becoming
entangled. Also, all cords and cables should be
placed so they are out of the reach of children.
Never climb on top of, nor place heavy objects
on the unit.
Never handle the power cord or its plug with
wet hands when plugging into, or unplugging
from, an outlet.
Before moving the unit, disconnect the power
plug from the outlet, and pull out all cords
from external devices.
Before cleaning the unit, turn off the power
and unplug the power cord from the outlet
(p. 7).
Whenever you suspect the possibility of
lightning in your area, pull the plug on the
power cord out of the outlet.
The cooling vents on the rear side of the unit
may become hot, so take care to avoid burns.
Do not remove the speaker grille and speaker
by any means. Speaker not user replaceable.
Shock hazardous voltages and currents are
present inside the enclosure.
USING THE UNIT SAFELY
Used for instructions intended to alert the
user to the risk of injury or material
damage should the unit be used
improperly.
* Material damage refers to damage or
other adverse effects caused with
respect to the home and all its
furnishings, as well to domestic animals
or pets.
Used for instructions intended to alert the
user to the risk of death or severe injury
should the unit be used improperly.
The symbol alerts the user to things that must be
carried out. The specific thing that must be done is
indicated by the design contained within the circle. In the
case of the symbol at left, it means that the power-cord
plug must be unplugged from the outlet.
The symbol alerts the user to important instructions or
warnings.The specific meaning of the symbol is
determined by the design contained within the triangle. In
the case of the symbol at left, it is used for general
cautions, warnings, or alerts to danger.
The symbol alerts the user to items that must never be
carried out (are forbidden). The specific thing that must
not be done is indicated by the design contained within
the circle. In the case of the symbol at left, it means that
the unit must never be disassembled.
About WARNING and CAUTION Notices About the Symbols
ALWAYS OBSERVE THE FOLLOWING