Connecting ac power, Figure 3-14 . ac power connection, 14. ac power connection – Runco XP-50DHD User Manual
Page 43: Pre l iminar y
PlasmaWall XP Series Owner’s Operating Manual
31
PRE
L
IMINAR
Y
Connecting AC Power
Plug the female end of the power cord into the AC receptacle on the rear of the
PlasmaWall. Connect the other end to your AC power source. (The XP-103DHD requires
200-240 VAC.)
Figure 3-14. AC Power Connection
Similarly connect the DHD Controller to a nearby AC outlet.
XP-50DHD
XP-65DHD
XP-103DHD (NOTE: The XP-103DHD requires 200 - 240 VAC)
This manual is related to the following products: