ritetemp 8030C - Manual (Page 3)

PG
3
PG
4
Set Day
Touch this area to set
the day of the week.
Set Time
Touch this area to set
the time of day.
Left arrow goes back,
right arrow goes forward.
Calibration indicator
This comes on if you
have altered the
calibration of your unit Calibration
Use this to calibrate your LCD
display to match another
thermometer.
Set
o
C -
o
F
Touch this to
set temperature
display.
Lock Program
Touch for 5 sec
to lock or unlock
Filter Timer set
Chirp set
Touch this to turn the
audible chirp on or off.
Temperature Swing
set
Return
HOME
Set Program Day
Touch this area to set
the day of the week you
want to program Target
Temps for. Set Time Slot
Touch this area to set
the Time Slot you
want to program.
Set Program Time
Touch this area to set the
time of day you want each
time period to start.
Left arrow goes back,
right arrow goes forward.
Copy
Touch this area to copy
current program to the
next day
Temp Up / Temp Down
arrows. Touch these to
raise and lower
each Target Temp.
Review
touch this area to auto cycle
through your program
Return HOME
When programming
is complete touch this
to run your program.
Displayed when the MENU button is pressed from the HOME screen.
Displayed when the PROGRAM button is pressed from the HOME
MENU screen
PROGRAM screen
1
2
3
CALIBRATE DISPLAY
-T FACTOR