Royal Sovereign RPA-5254R - Manual (Page 5)

HOT LAMINATING PROCEDURE
5
1. Turn the power switch to the (-) HOT position. The power indicator light
will light up. Allow 3-4 minutes for the machine to warm up. Please wait
until the ready indicator light is lit.
2. Place the item to be laminated into the laminating pouch.
3. Place the laminating pouch into the carrier.
4. Insert the carrier (with the closed edge first) into the front opening of the
laminator. Be sure to center the carrier as it is inserted.
5. The item will exit out of the rear of the machine when lamination is completed.
NOTE: Your finished laminated item will be hot, and will easily bend.
Place the item on a flat sturdy surface and allow it to cool.
RPA-5954R/5254R