RedMax PORTABLE GAS DRILL EDG2300 - Manual (Page 9)

Parts Location & Specifications
Setup
1. Attach the grip and the drill chuck to the
power unit securely by hand.
2. Insert the drill into the chuck, and tighten
firmly.
MODEL EDG2300
Overall Dimensions (LxWxH) in (mm) 14.7x8.42x9.34 (366x210x233)
Dry Weight lbs (kg) 10.6 (4.8kg)
Transmission Automatic centrifugal clutch and reduction gears
Reduction Ratio 1 : 10.6
Recommended drill size in (mm) Dia. 1/2in.(12.7mm)
Engine Type Air cooled 2-cycle gasoline engine
Displacement cc (cu. in) 22.5 (1.37)
Max. Output kW (HP) 0.87 (1.18) at 8000 rpm
Fuel Mixture (Gasoline 50 : 2-cycle oil 1)
(when using RedMax/ZENOAH genuine oil)
Fuel Tank Capacity pints ( ) 1.21 (0.57)
Carburetor Diaphragm type, Rotary Valve
Ignition System Transistor controlled flywheel magneto
Spark Plug NGK BPMR7A
Starting Recoil starter
Stopping Primary circuit short-circuiting
Standard Accessory Service tool kit
Specifications are subject to change without notice.
Stop switch
Throttle lever
Rear grip
Starter grip
Air cleaner
Fuel cap
Front grip
Reduction unit
Chuck
Drill
Spark plug Muffer
9 