ROWENTA GARMENT STEAMER IS9000 - Manual (Page 8)

8
Crease attachement*
• Gently push into place.
• Push on the handle to open out the
crease attachment .
• Place the garment between the crease
attachment and steam head.
• Release the handle.
• Starting at the top of the garment, move
the crease attachment in a downwards
motion.
• Once unit is unplugged and completely
cooled down, remove the crease
attachment by sliding it off of the steam
head.
Lint pad*
The lint pad removes hair, lint and animal
fur for a professional finish.
• To use the lint pad, slowly brush the
clothing with the grain or nap of the
fabric.
•The pad can be cleaned by brushing it in
the opposite direction. We recommend
cleaning the pad on an old cloth that can
be discarded.
After use
• After using the steamer, switch the
power off (power indicator light will go
out) and unplug the appliance.
• Hang steam head in an upright position
on hanger head when not in use.
• Wrap the cord around the power cord
clips for storage.
The lint pad is a separate accessory and
cannot be attached to the steam head.
You can use the lint pad independently
from the steamer.
or
*Depending on the model: these accessories are specific to certain models or available as an option.