Radio Shack Wireless Key-Lock Door/Window Alarm 49-118 - Manual (Page 4)

4
2
Mount the Alarm
Use the supplied adhesive strips or screws.
With Screws
1. Use the supplied drilling template to
mark the mounting screw location.
2. Drill two 1 /
16
inch (2 mm) holes.
3. Insert the top screw, leaving about 1 /
8
inch (3 mm) to attach the alarm.
4. Install the alarm over the top screw.
5. Remove the screw on the bottom of
your alarm and slide off the battery
compartment cover.
6. Insert the lower screw through the hole
inside the battery compartment.
-OR-