Maintenance – Ryobi P710 User Manual

Page 15

BATTERIES

The battery pack for this tool is equipped with nickel-cadmium
rechargeable batteries. Length of service from each charging
will depend on the type of work you are doing.
The batteries in this tool have been designed to provide
maximum trouble-free life. However, like all batteries, they
will eventually wear out.

Do not disassemble battery pack

and attempt to replace the batteries. Handling of these
batteries, especially when wearing rings and jewelry, could
result in a serious burn.
To obtain the longest possible battery life, we suggest the
following:
n

Remove the battery pack from the charger once it is fully

charged and ready for use.

For battery storage longer than 30 days:
n

Store the battery pack where the temperature is below

80°F.

Store battery packs in a "discharged" condition.

BATTERY PACK REMOVAL AND

PREPARATION FOR RECYCLING

To preserve natural resources, please
recycle or dispose of batteries
properly.
This product contains nickel-cadmium
batteries. Local, state or federal laws
may prohibit disposal of nickel-cadmium
batteries in ordinary trash.

Consult your local waste authority for information regarding
available recycling and/or disposal options.

WARNING:

Upon removal, cover the battery pack’s termi-
nals with heavy-duty adhesive tape. Do not at-
tempt to destroy or disassemble battery pack or
remove any of its components. Nickel-cadmium
batteries must be recycled or disposed of properly. Also,
never touch both terminals with metal objects and/or
body parts as short circuit may result. Keep away from
children. Failure to comply with these warnings could
result in fire and/or serious injury.

MAINTENANCE

Fig. 12

SLOTS

TABS

REATTACHING THE DUST BOWL

See Figure 12.
n

Position the two sections as shown. Align slots on bottom
of dust bowl with tabs on bottom of motor housing then
snap the two sections together.