Russound DPA-1.2 - Manual (Page 9)

9
6. SPECIFICATIONS
Audio power output: Continuous 35W @ 8 Ohms,
45W @ 6 Ohms.
Frequency response: 20HZ to 20KHZ -0.3dB.
Total harmonic distortion: 0.05% 8 Ohm .075% 6 Ohm
Input sensitivity: 400mV line
Input impedance: 22k Line Input
Signal to noise ratio: 85dB
Input trigger: 12VDC 10k
Output trigger: 12VDC 100mA
Auto off delay time: 2 to 10 minutes
Primary fuse: T2.0A /250V
Power requirements: Factory set for 120 VAC 60Hz or
230 VAC 50Hz.
2 terminal detachable power cord
For 230VAC operation, use a power
cord (not supplied) rated for 240VAC
2A or higher.
Weight: 9 lbs.
Dimensions: 6”W x 10”D x 3.5”H