Remington RPS 96 - Manual (Page 4)

4 104296
8’ ELECTRIC TELESCOPING POLE SAW
®
PRODUCT
IDENTIFICATION
Saw Chain
Hand Guard
Guide Bar
Oil Cap
Handle Bracket
Power
Cord
Inner Pole
Tighten
Coupling
Nut
Outer Pole
Trigger
Switch
Lock-out
Trigger
Switch
Power Cord
POLE SAW NAMES
AND TERMS
Coupling Nut Threaded collar (loosen to
slide inner pole, tighten to hold pole in
position).
Guide Bar Metal bar that extends from
saw body. The guide bar supports and guides
chain.
Inner Pole The moveable section of tub-
ing to which the saw is attached.
Kickback Quick backward and upward
motion of guide bar. Kickback may occur
when tip of guide bar touches an object
while chain is moving. The guide bar will
kick up and back towards operator.
Loosen
Oiler Control System for oiling guide bar
and chain.
Outer Pole Retains the moveable inner
pole.
Saw Chain (Chain ) Loop of chain having
cutting teeth for cutting wood. The motor
drives chain. The guide bar supports chain.
Sprocket Toothed wheel that drives chain.
Switch Device that completes or interrupts
electrical circuit to motor of saw.
Switch Lockout Device that reduces
accidental starting of saw.
Trigger Device that turns saw on and off.
Squeezing trigger turns saw on.
Releasing trigger turns saw off.
Trimming (Pruning) Process of cutting
limb(s) from a living tree.
Undercut An upward cut from underside
of log or limb. This is done while in normal
cutting position and cutting with top of
guide bar.
Figure 1 - Pole Saw Product Identification
Grip Area