REI VPC-64 - Manual (Page 12)

USING THE VIDEO POLE CAMERA
REI VPC/VPX 8
VIEWING RECORDED VIDEO
Video from an external video source can be viewed on the LCD Monitor of the VPC.
Using the supplied video cable, insert the 3.5mm stereo plug in the Video I/O Jack.
Then the Video In RCA jack in the external video source. Note, when used to view
external video signals the Camera’s video signal is not displayed.
USING THE FLEXIBLE EXTENSION (VPC-64 ONLY)
In some situation, especially small hard-to-reach places, the standard straight, rigid
pole may not adequate. For these situations the flexible extension may help.
The Flexible Extension is placed between the end of the pole and the camera. It
mounts to the camera and the pole in the same fashion as the camera mounts to the
pole. Once attached, the Flexible Extension will allow the camera to be twisted and
rotated in addition to the other adjustment previously mentioned.
Do not use the camera to twist the Flexible Extension, grab the thicker portion of the
Flexible Extension, near the camera. The Flexible Extension is not intended to rotate
360 degrees. Excessive force on the Flexible Extension could result in damage to the
Video Pole Camera. While using the Flexible Extension do not attempt to push any
object with the camera.