Roberts Radio MP-43 User Manual

Page 46

Touch panel sensitivity control

The sensitivity of the touch panel may be adjusted. The default setting will

normally be found to provide satisfactory operation, however, the touch

panel system may respond differently depending upon the moisture of the

skin. The touch panel sensitivity may be reduced or increased relative to

the standard setting.

1. Press and hold the Menu button

so that the display shows "Set

Brightness" on the lower line of the text display

2. Press and release the Tuning Up or Down buttons until the display

shows "Touch Pad Set".

3. Press and release the Select button to show the current setting.

4. Press and release the Tuning Up or Down buttons to change the

touch panel sensitivity level.

5. Press and release the Select button to save the new setting.

The default setting after a system reset is Normal.

3,5

2,4