Roberts Radio Chronoplus 2 - Manual (Page 14)

Listening to the radio
1. Switch on the radio by pressing the On/Off button.
2. Select the required waveband using the Waveband switch.
3. Tune in to the desired station using the Tuning control.
4. Adjust volume using the Volume control.
5. The Wire aerial located on the rear of your clock radio is for FM
reception. The wire should be fully extended and positioned for optimum
reception.
For MW reception there is a built in ferrite aerial. Rotate your clock
radio to the position giving best reception.
6. To switch off press the On/Off button.
13
Dimmer control
In order to adapt the intensity of the display to suit the ambient room
lighting, slide the dimmer switch on the left hand side of your clock radio
to select the dimmer brightness between the Hi or Low setting.
1,6
2
3 4
1