Rival CF106 - Manual (Page 6)

-6-
4. Make sure that fryer is off and insert plug into 120 volt AC outlet.
5. Turn fryer to desired temperature position. The Power Indicator will
illuminate. The Ready Indicator will illuminate when the oil has
reached the preset temperature.
6. Using your slotted spoon, place food inside the fryer (Do not over
stack food). Close Lid until it snaps into place. Overloading will lower
the oil temperature, causing food to absorb too much oil and cook
improperly.
7. For cooking times, see chart on page 8, or use the recommended
times in your recipe.
8. As your food fries, open lid and stir slowly with slotted spoon or other
heat-resistant utensil to prevent foods from sticking together.
9. Once the food reaches desired brownness, using your spoon, lift and
drain. Set the drained food on several layers of paper towels to
absorb excess oil. Season if desired. To fry more servings, repeat steps
5, 6, 7, 8 and 9.
WARNING: DO NOT USE THE
SureRELEASE
TM POWER CORD SYSTEM
TO DISCONNECT THE FRYER. ALWAYS DISCONNECT PLUG FROM
WALL OUTLET FIRST TO DISCONNECT FRYER.
Use only Model PL1215 magnetic cord set with this product. The use of
any other magnetic cord set may cause fire, electric shock, or injury.
CAUTION: The
SureRELEASE
TM power cord is only for accidental discon-
nection and not to be removed during normal operation. If the cord
becomes disconnected, the user should immediately unplug the cord
set from the wall outlet, then reconnect the magnetic cord to the deep
fryer and then to the wall outlet.
HOW TO USE YOUR DEEP FRYER (CONTINUED)