Radio Shack 32-2058 - Manual (Page 12)

12
The Basics
2. While talking, adjust DJ MIC LEVEL or AUX LEVEL until you get a
reading of less than 0 dB on both LED meters. See “using
an XLR microphone” on Page 16.
Notes:
• Write down the DJ MIC LEVEL or AUX LEVEL setting. Then, when
you want to mix with the microphone, you can adjust it to
this setting.
• If it was necessary to set DJ MIC LEVEL or AUX LEVEL to 10 in
order to get a reading less than 0 dB on the LED meter,
adjust either one to 8 and adjust DJ MIC GAIN to get a
reading less than 0 dB on the LED meters. See “gain” on
Page 18.
• If the above suggestion does not work, set DJ MIC GAIN or
AUX GAIN to about 5 and rotate MASTER clockwise until you
get a reading less than 0 dB. Remember that adjusting
MASTER affects the level of the previously set input sources.
You must readjust those sources accordingly.